_ RU.LINUX (2:5077/15.22) ___________________________________________ RU.LINUX _
From : Aleksey Zavilohin 2:5010/46.29 24 Jul 97 21:08:16
Subj : при загрузке комп говорит "LI"
________________________________________________________________________________
Г-й Alexander
| 23 Jul 97 | Alexander Podrezenko => All "LI...":
AP> Подскажите чайнику (и то начинающему) в чем дело? Red Hat 4.2
AP> недавно получил - проинсталлировал на комп P100/16/1Gb WD Caviar/S3
AP> Trio64/CD Mitsumi/Intel EtherExpress Все (вроде) установилось, но при
AP> загрузке с винта или дискеты комп говорит "LI"
Выдержка из доки, ищите
(<nothing>) No part of LILO has been loaded. LILO either isn't installed
or the partition on which its boot sector is located isn't active.
L <error> ... The first stage boot loader has been loaded and started,
but it can't load the second stage boot loader. The two-digit error
codes indicate the type of problem. (See also section "Disk error
codes".) This condition usually indicates a media failure or a geometry
mismatch (e.g. bad disk parameters, see section "Disk geometry").
LI The first stage boot loader was able to load the second stage boot
loader, but has failed to execute it. This can either be caused by a
geometry mismatch or by moving /boot/boot.b without running the map
installer.
LIL The second stage boot loader has been started, but it can't load
the descriptor table from the map file. This is typically caused by a
media failure or by a geometry mismatch.
LIL? The second stage boot loader has been loaded at an incorrect
address. This is typically caused by a subtle geometry mismatch or by
moving /boot/boot.b without running the map installer.
LIL- The descriptor table is corrupt. This can either be caused by a
geometry mismatch or by moving /boot/map without running the map
installer.
LILO All parts of LILO have been successfully loaded.
Всего,
villain
e-mail: villain@ems.chel.su
http://villain.ems.chel.su
--- FEddi 0.9pl7 via ifcico
* Origin: Колеса любви едут прямо по нам (2:5010/46.29)
Vova
